|
Press Release
|
American Racer 215 Mini Bike Parts Kit
 American Racer 215 Mini Bike Parts Kit American Flyer 215     |
|
IN STOCK
Part Number: AMR215PK
Quantity Pricing
| Quantity | Amount |
| 2 to 3 | $391.02 |
| 4 to 6 | $387.03 |
| 7 to 999 | $383.04 |
|
|
AMERICAN RACER 215
PARTS KIT FRAME SOLD SEPARATELY
add this Parts Kit and Motor to the Frame kit to complete your build. choose a Honda GX, Titan or Predator Engine, GTC Torque Converter, 8" Wheels, add Stinger Exhaust, Mikuni Carb Kit and many other options
Designed by the masters, the 215 brings back many of the classic features found on Bonanza bikes of the past, with a few important upgrades:
Parts Kit:
L1065-3020 Front Wheel, 8"
L1065-3021 Front Wheel Bearing
L1065-3052 Front Tire 480 x 8
L1065-3053 Front Tube 480 x 8
L1065-3012 Front Wheel Spacers, (2)
L1065-3013 Front 5/8 Axle
L1065-3014 Front 5/8 Nut for Axle
L1065-3017 Kickstand
L1065-3059 Foot Peg Rubber (2)
L1065-3020 Rear Wheel, 8" w/(2) Bearings
L1065-3021 Rear Wheel Bearing
L1065-3052 Rear Tire 480/400 x 8
L1065-3053 Rear Tube 480/400 x 8
L1065-3024 Rear Wheel Spacer, (1)
L1065-3025 Rear 5/8 Axle
L1065-3026 Rear 5/8 Nut for Axle
L1065-3027 54T Rear Drum/Sprocket, combo
L1065-3028 5" Drum Brake Assy
L1065-3030 5" Brake Components
L1065-3054 Throttle Control & Grips 1"
L1065-3035 Throttle Cable
L1065-3036 Throttle Wire Stop
L1065-3037 Brake Lever
L1065-3038 Brake Cable
L1065-3039 #40 Chain
L1065-3040 #40 Master link
Builder Notes:
The 215 can be assembled in about 2 hours. The Frame has been upgraded to Heavy Duty 1" DOM Tubing. a 5 degree engine mount has been added to accommodate installation of a Torque Converter. Although the Engine bay is taller, the gas cap on some engines like Predator can be a bit difficult to remove. The Honda GX120 and Lifan 3hp engines install without necessitating removal of the stock gas tank, and may be used with a centrifugal clutch only. A Low Profile Gas Cap is available for the Honda GX160/200 engines. The Predator does not have a low profile Gas Cap available at this time but the stock Tank can be easily removed and installed on the frame in front of the seat with heavy duty zip ties. Add the Stinger Exhaust, Mikuni Carb Kit and many other options for any of the above engines.
|
ADD:
- Honda GX120/160/200 Engine
- Titan TX160/200 Engine
- Predator 212 Engine
- GTC 30 Torque Converter
- Extreme Clutch #40/41 10T
|
PERFORMANCE OPTIONS:
- Stinger Exhaust
- Fatty Exhaust
- K&N Stock Carb Kit
- Mikuni Carb Kit
- Cylindrical Gas Tank
*options fit on all listed engines
|
WARNING: INJURY OR DEATH MAY OCCUR
THESE ARE PARTS ONLY. No representation is made regarding use of these parts for a specific purpose. Customer Assumes All Risk associated from using these parts or operating any device using these parts. Customer is responsible for any and all final design of application and use of these parts. Only persons with proper mechanical training should use these parts
|
IMPORTANT
READ THIS BEFORE ANY ASSEMBLY
Mini-bikes must be operated in accordance with all applicable laws and regulations and riders must comply with all requirements regarding head, eye and body protection. Please check with appropriate government agencies before operating your mini-bike. Prior to any operation, all riders must be properly trained in, and fully knowledgeable of all mini-bike functions and safe operation and procedure. Full compliance with this with all information set forth in these guidelines is mandatory.FAILURE TO FULLY COMPLY IS UNSAFE AND COULD POSSIBLY RESULT IN SERIOUS INJURY OR DEATH.
CHAIN GUARD
WARNING: This kit does NOT contain a Chain Guard. IT IS UNSAFE TO OPERATE A MINI-BIKE WITHOUT A CHAIN GUARD. DO NOT OPERATE WITHOUT A CHAIN GUARD COVERING BOTH SPROCKETS AND THE CHAIN.
ASSEMBLY SAFETY
Assembly should be performed by knowledgeable individuals using appropriate tools. Please consult with your retailer or a Kart or Mini-Bike shop or your local, knowledgeable mechanic if you experience problems with, or have questions about any portion of the assembly process, individual or overall function or operation whatsoever.
CAUTION! COMPRESSED AIR CAN BE DANGEROUS! Containment guards and eye protection should be used when inflating tires. Assemble tires and wheels with care. Never force a tire onto a wheel by prying against the wheel rim. A properly assembled tire will seat itself onto the wheel rim with less than 15 pounds per square inch (psi) of air pressure.
|
|
|
|
|
MSRP: $45.95
PRICE: $39.95
|
|
|
3521 - CENTRIFUGAL CLUTCH 3/4" BORE, #35P, 12T
|
|
|
|
|
|
MSRP: $199.00
PRICE: $159.00
|
|
|
11 inch Gas Tank Kit for Honda GX120/160/200 and clone engines including Predator. Optional hardware for mounting on engine. Bare Metal, Powdercoat or Polished finish optionally available. requires mikuni stage 1 kit
|
|
|
|
|
|
|
|
|
|
HF Predator 212 Engine 6.5 HP (212cc) OHV Horizontal Shaft Gas Engine. *CARB APPROVED FOR CA
|
|
|
|
|
|
|
|
|
|
Includes Intake, Exhaust, Chain/Heat Guard, Top Plate, Fuel Pump, Valve Springs, Cam, Main Jet, Billet Flywheel, Billet Rod and more. fits the 5.5 and 6.5hp Honda GX160 / GX200 and clone engines. Works great on our Titan Engines
|
|
|
|
|
|
MSRP: $295.00
PRICE: $239.95
|
|
|
Torque Converter (Big Plate) for the Little BadAss Minichopper. GTC 1002-LBA TC2 3/4" Bore, 10 Teeth, #40/41 chain, Easy to install, Bolts onto your Honda GX160/200 and clones including Titan and Predator. Triples Power, Acceleration and Speed
|
|
|
|
|
|
|
|
|
|
for most minibikes including Taco 22, Red Devil, fits Honda GX120/160/200, Titan TX200, Predator 212 and others. Unbelievable Sound, Performance from this pipe. Pipe runs thru the frame on the Mini Bike. sorry, cannot be sold in CA
|
|
|
|
|
|
|
|
|
|
215 Frame Kit, then add Parts and Motor to complete your build. 1" HD Frame, 5 Degree Engine Mount, Frame can accommodate Honda GX Engine, GTC Torque Converter, 8" Wheels, Metal Fenders, Top Tank, Hi-rise Bars. MADE-IN-USA
|
|
|
|
|
|
|
|
|
|
TX160 5.5hp Powersport Engine for Go Kart or Mini Bike. Throttle Hookup, Compatible with Honda GX160 Engine and GTC Torque Converter. *CANNOT BE SOLD IN CA
|
|
|
|
|
|
|
|
|
|
fits Taco 22, Red Devil and many other Mini Bikes 22mm Mikuni Carburetor Kit, for your Honda GX120 / GX160 /200 engine or clone including Titan and Predator Engines. Kit includes: Curved Intake Manifold, 22mm Mikuni Carb, High Flow Air Filter and Stinger
|
|
|
|
|
|
|
|
|
|
Gas Tank for Red Devil Mini Bike. Installs with the optional behind-the-seat mounting bracket. Bare Aluminum, Polished or Powdercoat options
|
|
|
|
  worldwide shipping
TOP PRODUCTS
 |
|