MSRP: USD$69.00
PRICE: USD$47.87
Mikuni Curved Intake Manifold for mounting the 22mm Mikuni carburetor onto a Honda GX120/160/200 and clone engines including Titan and Predator. It also angles the air filter towards the engine in ideal position for use on a minibike
|
MSRP: USD$199.00
PRICE: USD$139.00
11 inch Gas Tank Kit for Honda GX120/160/200 and clone engines including Predator. Optional hardware for mounting on engine. Bare Metal, Powdercoat or Polished finish optionally available. requires mikuni stage 1 kit
|
HF Predator 212 Engine 6.5 HP (212cc) OHV Horizontal Shaft Gas Engine. *CARB APPROVED FOR CA
|
MSRP: USD$12.00
PRICE: USD$7.95
The AR3910X spark plug is longer. This increases compression and can add as much as 3/4hp. A must have for your Honda, or clone. Convert your engine to Box Stock class. fits 5.5 and 6.5hp engines Honda and clones. Works great on Titan and Predator Engenes
|
MSRP: USD$55.00
PRICE: USD$34.95
DJ-1109i From Dyno Cams, the CL-1 Improved Cam for Honda GX160, GX200 and Clone Engines. fits the 5.5 and 6.5hp engines Honda and clones. Works great on our Titan Engines
|
MSRP: USD$479.00
PRICE: USD$399.95
Take your stock Honda, Titan or Clone, and use this kit to Build your own Superbox class engine fits the 5.5 & 6.5hp Honda GX160 / GX200 and clone engines. Works great on our Titan Engines
|
MSRP: USD$189.00
PRICE: USD$147.95
fits Taco +other Mini Bikes & Karts, 22mm Mikuni Carburetor Kit, fits Honda GX120/160/200 engine or clones Titan and Predator. Kit includes: Mikuni Curved Intake Manifold which puts the carb in optimum position for a minibike. great for karts too
|
Includes Intake, Exhaust, Chain/Heat Guard, Top Plate, Fuel Pump, Valve Springs, Cam, Main Jet, Billet Flywheel, Billet Rod and more. fits the 5.5 and 6.5hp Honda GX160 / GX200 and clone engines. Works great on our Titan Engines
|
Honda GX160/200 and Titan heat treated stock lift cam was designed to exploit the 2012 Builders Prepared cam rules. meets lift requirements for stock but has a lot of extra duration producing better hp over a broader RPM range. Also fits Predator "Hemi"
|
The BP2 has a lot of extra duration producing better horsepower over a broader RPM range. This cam will easily allow your motor to turn up into the higher RPM range and will require upgraded spring package if your exhaust and intake systems are upgraded.
|
very aggressive ramps and requires an upgraded valve train package, billet rod, and flywheel. Excellent stock appearing cam when required to run a stock style carburetor. see below forvalve train upgrade recommendatons. will NOT fit the Predator "Hemi"
|
DJ-1109i From Dyno Cams, the CL-1 Improved Cam for Honda GX160, GX200 and Clone Engines. fits the 5.5 and 6.5hp engines Honda and clones. Works great on our Titan Engines
|
Non-Adjustable Billet Aluminum Flywheel for the Harbor Freight Predator 212 cc Engine.SFI certified billet aluminum flywheel. Fits the old style non "hemi" head Harbor Freight Predator 212 with tin sheet metal valve cover model #69730.
|
Billet Rod for the Harbor Freight Predator.
It is one of our Pro Series Rods, featuring ARC's trademark forced oil dipper. CNC machined from aircraft grade 7075-T651 aluminum.
|
for most minibikes including Taco 22, Red Devil, fits Honda GX120/160/200, Titan TX200, Predator 212 and others. Unbelievable Sound, Performance from this pipe. Pipe runs thru the frame on the Mini Bike. sorry, cannot be sold in CA
|
Mini Bike Exhaust Header. For Honda GX160/200 and clones including Titan & Predator. This trick exhaust curves to run the pipe thru the frame and out of the way. Awesome sound and performance. A MUST HAVE
|
for Stock Carb, Air Intake kit includes optional Billet Aluminum Carb Intake Adapter, Angled Air Filter and mounting Clamp for your Honda GX120/160/200 or clone engine, for stock carb. works great on our Titan and Predator engines
|
Stock Carburetor Main Jet, for Honda GX160 GX200 and clones. When you upgrade your intake and exhaust, you will need to re-jet your carb. The main jet is easily replaceable. Choose from sizes 034, 035, 036 or 037
|
MSRP: USD$59.00
PRICE: USD$25.95
Our top plate/throttle mechanism is CNC machined from 1/8" aluminum plate so you know it looks great. The integrated throttle mechanism is adjustable to maximize foot pedal travel giving you more precise throttle control. Honda GX160/120 and clones
|
MSRP: USD$59.00
PRICE: USD$48.50
5436C Honda / Clone Exhaust Curved Header exhaust pipe will wake up your Honda GX120/160/200 or clone engine. Get on the throttle with this bolted on your motor and prepare for instant RPMs and acceleration. works great on our Honda, Titan and Predator
|
MSRP: USD$29.95
PRICE: USD$18.95
for stock carb, Billet Aluminum Carb Intake Adapter for installing High Flow Angled Air Filter on your Honda GX160 / GX200 or clone engine. works great on our Titan engines. see option for Predator 212
|
MSRP: USD$149.00
PRICE: USD$99.95
SFI certified billet aluminum flywheel for Honda GX160, GX200, & 196cc Clone. The keyway is fixed in the stock position and the stock pull starter can be used. Weighs 3.5lbs and incorporates a special low drag fan design
|
MSRP: USD$49.00
PRICE: USD$34.95
AKRA legal Super Box Exhaust muffled header. Fits Honda GX120/160/200 and clones. Works great on our Titan Engines. 1.0625" OD , .930" ID , 22 " long. Add a B91 stock muffler
|
MSRP: USD$23.95
PRICE: USD$19.95
Pre-Filter, GENUINE K&N with white lettering, fits the Genuine K&N High Flow Angled Air Filter and standard Angled Air Filter for the Honda GX120/160/200 and clone engines
|
Stock Cam, Honda DJ-1105 Box Stock Steel Cam for GX160, GX200 and Clone Engines. fits the 5.5 and 6.5hp engines Honda and clones. Works great on our Titan Engines
|
MSRP: USD$24.95
PRICE: USD$21.95
Used to mount our 7" and 11" Cylindrical Gas Tanks directly onto the engine. for any minibike or gokart. set of 2 brackets and clamps. fits Honda GX120/160 or GX200 and clones including Predator and Titan engines
|
for Stock Honda GX Carb, Air Intake kit includes optional Billet Aluminum Carb Intake Adapter, Angled Air Filter and mounting Clamp for your Honda GX120/160/200 or clone engine, for stock carb. works great on our Titan engines
|
Billet Aluminum Engine Mount raises the engine to enable installation of a Torque Converter on a minibike or gokart. fits 2-7hp engines, Honda GX160 / GX200 or clone engine, Tecumseh, Subaru, Briggs, Kohler, works great on our Titan engines
|
Billet Aluminum Carb Intake Adapter enables installation of High Flow Angled Air Filter on your Honda GX160 / GX200 or clone engine. works great on our Titan engines
|
GENUINE K&N High Flow Angled Air Filter, and mounting Clamp for your Honda GX160 / GX200 or clone engine. works great on our Titan engines
|
GENUINE K&N Pre-Filter. for use on K&N High Flow Angled Air Filter
|
BILLET FLYWHEEL for Honda GX160/GX200, Titan and clones
|
Add this Parts Kit to the Taco or any Mini Bike Frame to complete your roller. (Seat, Engine and other components can be added to this kit). Great Mini Bike rebuild kit
|
fits Taco 22, Red Devil and many other Mini Bikes 22mm Mikuni Carburetor Kit, for your Honda GX120 / GX160 /200 engine or clone including Titan and Predator Engines. Kit includes: Curved Intake Manifold, 22mm Mikuni Carb, High Flow Air Filter and Stinger
|
Gas Tank for Red Devil Mini Bike. Installs with the optional behind-the-seat mounting bracket. Bare Aluminum, Polished or Powdercoat options
|
Stage 1 Kit for Stock Carburetor on your Honda GX120/160/200 engine or clone including Titan and Predator Engines. Kit includes: Thru-the-Frame Fat Exhaust Header, K&N Angled High Flow Air Filter, K&N Pre-Filter, Billet aluminum Intake Adapter, Decals
|
MSRP: USD$39.95
PRICE: USD$24.95
Air Filter Adapter for Stock Carb on Honda GX160 GX200 +clone Engines. Allows the installation of our performance Air Filters. Used by Kart Racers in the Honda Clone Class. fits the 5.5 and 6.5hp engines Honda and clones. Works great on our Titan Engines
|
MSRP: USD$25.95
PRICE: USD$21.95
Stock Gasket Set for Honda GX160 5.5hp, GX200 6.5hp engines and clones. fits our Titan TX160 5.5hp and TX200 6.5hp Engines and clones
|
MSRP: USD$17.00
PRICE: USD$15.95
DJ-1055WA Valve Springs for Honda GX160 and GX200 and clone Engines. superior in every way to the old trick springs fits the 5.5 and 6.5hp engines Honda and clones. Works great on our Titan Engines
|
MSRP: USD$29.95
PRICE: USD$24.95
Predator 212 Stock Gasket set includes the following: Carb to intake insulator gasket, Intake insulator to head gasket, Header gasket, Valve cover gasket, Side cover gasket, Air box to carb spacer, Head gasket, NOTE!!! DOES NOT INCLUDE: Crank Seals
|