Briggs Animal Racing Engine
Briggs Animal Racing Engine
Couldn't load pickup availability
ANIMAL
Racing Engine
Briggs Animal Racing Engine. The latest approach in engineering, manufacturing, and testing to design from the ground-up, a dedicated RACING engine. In addition, every engine is hand-built by master engine technicians. sealed at the factory, race ready
Features
- Displacement 206
- Bore 2.6875/2.6885
- Stroke 2.2
- Compression Ratio 8.5 to 1
- 29 degrees BTDC
- Dual Ball-Bearing, RACING Reinforced Cylinder
- Squeeze-Cast, T-7 Treated, Racing Rod
- Ground Cam w/ Compression Release
- High-Silicon Valve Springs
- PVL™ Digital Ignition System
- Racing Only Intake Port
- Walbro™ Round - Slide Carburetor
- Dana™ Fire-Ring Head Gasket
- Racing Crankshaft w/ Induction-Hardened Crankpin
- Federal Mogul™ Cam Ground, Barrel-Faced Piston
- Chrome-Faced, Racing Only Ring Package
- Nitrited Dished Exhaust Valve
- Automotive 3-Piece Valve Retainer System
- Beefy Rocker Arm Stud Nuts
* fuel pump pictured not included, add fuel pump, exhaust, air filter and clutch below
SPECS:
Description | Wrench / socket size | Torque |
---|---|---|
Air Guard | 7mm | 40-50 lb-in. (4.5-5.6 Nm) |
Blower Housing | 10mm & 3/8" | 60-110 lb-in. (7-12.5 Nm) |
Carburetor (to manifold) | 10mm | 80-110 lb-in. (9-12.4 Nm) |
Connecting Rod | T27 | 115-120lb-in. (13 Nm) |
Cylinder Head Bolts | 10mm | 200-220 lb-in. (20-27 Nm) |
Exhaust Brace Screws | 10mm | 95-125 lb-in. (11-14 Nm) |
Exhaust Stud | 10mm | 95-125 lb-in. (11-14 Nm) |
Flywheel Nut | 15/16" | 55-75 ft-lbs. (74.5-101 Nm) |
Flywheel Fan | 10mm | 180-240 lb-in. (20-27 Nm) |
Intake (to cylinder) | 5mm Allen | 70-90 lb-in. (8-10.2 Nm) |
Oil Drain Plug | 3/8" | 100-125 lb-in. (11-14 Nm) |
PVL Module | 7mm | 20-35 lb-in. (2.3-4 Nm) |
Rocker Arm Stud | 7/16" | 90-120 lb-in. (10-14 Nm) |
Rocker Arm Plate | 10mm | 70-90 lb-in. (7.9-10.1 Nm) |
Rocker Arm Set Screw | 1/8" Allen | 50-70 lb-in. (5.6-7.9 Nm) |
Spark Plug | 5/8" Deep | 95-145 lb-in. (11-16.4 Nm) |
SIde Cover | 10mm | 95-125 lb-in. (11-14 Nm) |
Starter Gear | #2 Phillips | 35-53 lb-in. (4-6 Nm) |
Top Control Plate | 10mm | 70-90 lb-in. (8-10 Nm) |
Valve Cover | 10mm Lower & 3/8" | 30-60 lb-in. (3.5-7 Nm) |
Briggs & Stratton does not approve or authorize the use of these engines on 3 wheel all-terrain vehicles (ATV s), motor bikes, fun/recreational go-karts, or aircraft products. Use of these engines in such applications could result in property damage, serious injury (including paralysis), or even death. This engine requires special technical expertise and preparation before it can be used in competitive events.
Share

I was blown away with the quality of this thing, and the power!
Mark Harvy
-
Free Shipping
-
Easy Returns
-
Money back guarantee
Get on our mailing list
Be the first to know about new Products and exclusive offers.